GENERAL DATA OF THE INTERVENTION
- The
button allows you to add, on the spot, another aspect of intervention not yet defined, even in extemporaneous aspects. After pressing the button, the description must be inserted in the next field that appears.
- Above this, then you can vary the type of intervention.
- Control inspector: indicate the person making the inspection. The system automatically makes the user name’s insertion. If you wish to change the name you must have appropriate authorizations and know the password of the person that you want to insert.
- Intervention time: note the time (hours/minutes) that it was necessary to perform the intervention.
- Reference instrument can invoke the sample instrument indicated in the Intervention Plan and Control .
- Regarding the State’s variable of intervention possible selections are:
- Not performed: is used when it is believed not to have to make the variable control, and in fact should not be used often.
- To be performed: default at the beginning of the intervention.
- Action completed: marks the completion of all operations (measurements, etc.).
-
Below these indications appear two panes with notes for different types of information:
- Notes for the intervention: only read, show the indications to follow for the intervention, as previously annotaded as Intervention Plan notes and Control variables.
- Notes: allows you to write any comments or bug reports concerning the execution of the interventions.
REGISTRATION OF DETECTED IN THE CONTROL MEASURES
If it is an interventions about subject to measurement,will appear within a tab pane , measurement values, necessary for the compiling of the part relating to measurements:
In addition to the existing fields in tab Management instrument variables (Nominal, Minimum and Maximum, unit of measure), it will trigger other three fields:
- Initial size, in which the recorded value is inserted at the beginning of the intervention,
- Average final, in which the program calculates the average of the measurements recorded and
- Std. deviation where is the standard deviation of the same measures that gives the idea of measurement variability.
- If one of these two values goes out limits, the program highlights in red the value and warned of a further criterion.
- In the field Maximum wear the maximum allowable wear. If the difference between the initial and the final one of the variable exceeds that value, the program gives.
- In the field Prec. , which is only active from the second intervention onward, the final value of the previous operation performed on the same variable, which may be worth as a term of comparison.
If the measurements provided in the Intervention and control plan are more than one
the program gives the indication of the number of measurements to be made and opens a grid for the insertion of different surveys.
The measures taken are listed in the Value, while in Error, the program gives automatically the difference compared to the nominal value provided.
In the field “Aver. fin”. (activated on the grid), the program calculates the average of the various measures taken.
After the intervention completion, the status of the selected Variable will match “Action completed”
COST OF REGISTRATION
After the recording of the action is possible, returning to record the costs tab of the same intervention, by pressing the button “Registration”. You will get the normal tab of Cost recording (for the Help which refer to appropriate section ).
Recorded costs are given in table:
